D/A converters - Streaming |
<< Vorige - Volgende >> |
Luxman DA-200 D/A Converter - DAC - VoorversterkerArtikelcode: DA20
|
||
|
Luxman DA-200 D/A Converter - DAC - Voorversterker
Features Luxman DA200: Innovated D/A converter with USB correspondence for variety of functions, terminals, and connections.
Featuring high sound quality circuit from the SACD player.
High resolution sound source of sampling frequency.
Built-in head phone amplifier and pre-amp circuit.
XLR balance output terminal for superior resistance noise efficiency.
Supports both PC and Mac environments
 Specifications LUXMAN DA 200:
Correspondence sampling frequency:
-COAX/OPT input: 32kHz, 44.1kHz, 48kHz, 88.2kHz and 96kHz, 176.4kHz and 192kHz
-USB input: 32kHz, 44.1kHz, 48kHz and 96kHz
* 16 - 24bit 2ch PCM
Digital input: USB (B type), COAX and OPT
Digital output: COAX and OPT
Analog input imbalance: 2 system
Analog output:
-Imbalance 1 system (fixing of output level/variable change-over Switch attachment)
-Balance 1 system (as for output level regular fixing, 3rd pin HOT)
-Head phone 1 system
Line input sensitivity/Input impedance: 290mV/24kohm
Line output voltage:
-Imbalance: Digital input (fixing output) 2.5V
-(Variable output) 8.7V and analog input (fixing output) 290mV
-(Variable output) 1.0V (installed capacity 10.0V)
-Balance: 2.5V
Head phone output: 130mW+130mW (600ohm), 80mW+80mW (32ohm), 40mW+40mW (16ohm)
Line output impedance: Imbalance: 400ohm and balance: 600ohm
Frequency characteristic:
-Digital input: 2Hz - 60kHz (+0, - 3.0dB)
-Analog input: 3Hz - 130kHz (+0, - 3.0dB)
All the harmonic distortion factors:
-Digital input: 0.0009% (imbalance), 0.0006% (balance)
-Analog input: 0.003% (1kHz)
signal-noise ratio (IHF-A): Digital input: 119dB and analog input: 103dB
Power supply voltage: AC100V (50/60Hz)
Electric power consumption: 11W
Size: W364 x H81 x D279 mm
Weight: 5.1kg
2900.00
|
